Table of Contents
Advertisement
2-2 Connect to Presentation Server by Wireless Ethernet
2-3 Set the IP address of the Computer
If there's no DHCP server available on your LAN, please follow the following
instructions to set the IP address of the computer, so the computers wish to
use the Presentation Server can connect to project server.
If the operating system of your computer is....
Windows 2000
Windows XP
Windows Vista
2-3-1 Windows 2000 IP address setup:
1. Click 'Start' button (it should be located at lower-left corner of your computer),
then click control panel. Double-click Network and Dial-up Connections icon,
double click Local Area Connection, and Local Area Connection
Properties window will appear. Select 'Internet Protocol (TCP/IP)', then click
'Properties'
- please go to section 2-3-1
- please go to section 2-3-2
- please go to section 2-3-3
22
Advertisement
Table of Contents
