Reissued: 07-Jul-15
Model:
Z-C2_SOP/ OR-C2_SOP/ Cor-C1_SOP/
MET-C1ab_SOP/ MET-C1cde_SOP/MET-C1yz_SOP
Version
- The second screen will remain even while the job is being printed.
3.
When the "Stop" key is pressed while scanning one side of a
document, the message "You do not have the privileges to use the
following function. Auto Color Sel." will be displayed.
This firmware is dependent on the following firmware modules. Please be
sure to update all of them:
- System/copy firmware:
Model Met-C1ab: v3.11 or later (D1465550X)
Model Met-C1cde: v3.12 or later (D1485550Y)
Model Met-C1xyz: v2.11 or later (D1765550N)
Model Cor-C1: v1.11 or later (D2025550M)
Model Z-C2: v1.07 or later (D1935771G)
Model OR-C2: v1.14 or later (D1835530K)
- CheetahSystem:
v1.39 or later (D1501440Y)
- SDKService:
v1.06.01 or later (D1501437F)
1.1
Initial release
echnical
T
B
Modified Points or Symptom Corrected
ulletin
Date:
27-Mar-15
PAGE: 2/2
No
.: RD193047b