Safety; Meaning Of Safety Icons And Wording - ABB LLT100 Operating Instructions Manual

1 Safety

This section provides an overview of the safety aspects that
must be observed when operating the instrument.
The instrument has been constructed in accordance with the
state of the art and it is operationally safe. It has been tested and
left the factory in perfect working conditions. The information
in this guide, as well as the applicable documentation and
certificates, must be observed and followed to maintain this
condition throughout the period of operation.
Full compliance with the general safety requirements must be
observed during operation of the device. In addition to the
general information, the individual sections in the manual
contain descriptions of processes or procedural instructions
with specific safety information.
Only by observing all of the safety information can you reduce
to the minimum the risk of hazards for personnel and/or
environment. These instructions are intended as an overview
and do not contain detailed information on all available models
or every conceivable event that may occur during setup,
operation, and maintenance work.
For additional information, or in the event of specific problems
not covered in detail by these operating instructions, please
contact the manufacturer. In addition, ABB declares that the
contents of this manual are not part of any prior or existing
agreements, commitments, or legal relationships; nor are they
intended to amend these.
All obligations of ABB arise from the conditions of the relevant
sales agreement, which also contains the solely binding
warranty regulations in full. These contractual warranty
provisions are neither extended nor limited by the information
provided in this manual.
Read this manual carefully before working with the instrument.
For personal and system safety, and to obtain optimum
performance, make sure that you thoroughly understand the
contents of this manual before installing, using, or maintaining
the instrument.

1.1 Meaning of safety icons and wording

DANGER S
ERiouS DAmAGE to hEAlth
DANGER indicates a hazardous situation that, if not
avoided, will result in death or serious injury.
WARNiNG D
AmAGE to hEAlth
WARNING indicates a hazardous situation that, if not
avoided, could result in death or serious injury.
CAutioN
CAUTION indicates a hazardous situation that, if not
avoided, could result in minor or moderate injury.
NotiCE
NOTICE indicates information considered important,
but not hazard related, that could impact things other
than personal injury, like property damage.
Indicates the presence of electrical energy at voltages
high enough to inflict harm on living organisms.
The laser warning icon indicates the presence of a
laser related hazard. It also indicates the type of laser
in use, its wavelength and its safety class.
Indicates the presence of sharp edges that could
cause personal injury if touched.
E
Indicates device susceptibility to electrostatic
discharges (ESD).
Indicates protective earth terminals which are intended
for connection to an external conductor for protection
against electrical shock in case of a fault, or the
terminal of a protective earth (ground) electrode.
Indicates the presence of direct current.
/R
iSk to lifE
/R
iSk to lifE
D
AmAGE to hEAlth
h V
iGh oltAGE
l
ASER RADiAtioN
S E
hARp DGES
lECtRoStAtiC DiSChARGES
OI-LLT100-EN Rev. D | User Guide 1