Quick Setup; Introducing The Default Factory Settings - ABB LLT100 Operating Instructions Manual

5 Quick setup

Sensor offset
Vessel height
Figure 15 General model
The LLT100 can be configured with the integrated, keypad-
controlled and menu-driven LCD user interface.
Before setting up your LLT100 instrument, it is important to
know which value is associated with which setting. Figure 15
illustrates these values and settings.
Ullage
Level

5.1 Introducing the default factory settings

The LLT100 is delivered with the following default settings:
Parameter
Measurement mode
Vessel height
Vessel empty (LRV)
Vessel full (URV)
Damping
No-measurement period
4 – 20 mA output (PV)
PV unit
LLT100 failure (alarm)
Vessel full (URV)
Vessel empty (LRV)
Factory setting
Standard
200 m
0.0
Vessel height
1 second
15 seconds
Level
Meter
High (21 mA)
OI-LLT100-EN Rev. D | User Guide 15