Table of Contents
Advertisement
Using Your FPD 1530 Monitor
Display colors are wrong
Press the
the ideal settings.
Restart the system with the monitor turned on.
Make sure that the video cable is not damaged.
Check the video port and the end of the video cable for any pins that
might be bent or pushed in.
Make sure the video cable is securely connected to the back of the
monitor and computer.
Picture has shadows or "ghosts"
Press the
the ideal settings.
Remove any extension cables or switchboxes.
Make sure the video cable is securely connected to the back of the
monitor and computer.
Check the video port and the end of the video cable for any pins that
might be bent or pushed in.
Make sure that the video cable is not damaged.
Color is not uniform
Make sure the monitor warms up for at least 30 minutes before making
a final judgment about color uniformity or brightness.
Press the
the ideal settings.
Image is not sized or centered properly
Press the
the ideal settings.
Use the position controls to adjust the image. For instructions on how
to change your monitor settings, see "Adjusting monitor settings" on
page 6.
18
button to automatically adjust your display image to
AUTO/SET
button to automatically adjust your display image to
AUTO/SET
button to automatically adjust your display image to
AUTO/SET
button to automatically adjust your display image to
AUTO/SET
www.gateway.com
Advertisement
Table of Contents
