Table of Contents
Advertisement
Starting the monitor
To start the monitor:
1
Press the power button on the monitor. The LED on the button turns on.
2
Turn on the computer.
3
After the computer is running, the LED on the monitor power button
should be green. Allow about 10 seconds for the display image to appear.
If the power LED is not green or you do not see a display image, check
the connections. For more troubleshooting information, see
"Troubleshooting" on page 17.
4
Adjust the tilt of the monitor for the best viewing angle.
5
Adjust the controls to get the best picture. After you see the Windows
desktop, press the
image to the ideal settings. Adjust other monitor settings by using the
on-screen display (OSD). For more information, see "Adjusting monitor
settings" on page 6.
Important
button to automatically adjust your display
AUTO/SET
When adjusting your monitor settings, always press the
AUTO/SET button before entering the OSD. This will
automatically adjust your display image to the ideal
settings for the current screen resolution.
The best screen resolution is 1024 × 768.
www.gateway.com
Starting the monitor
Power button
and LED
5
Advertisement
Table of Contents
