Picture Is Scrambled; Display Colors Are Wrong; Picture Is Fuzzy - Gateway LE500 Manual

Picture is scrambled

If your picture is scrambled or does not look right, you can reset your monitor to its default
video mode and resolution settings. See the "Adjusting display settings" section of this
guide for more information.
To reset your monitor to its default settings:
1 Start the system.
2 Press C
3 Select
Safe mode
are not loaded.
4 Click
Start,
opens.
5 Click/Double-click the
6 Click the
7 Click
Advanced
8 Click the
9 Click
Change
10 Select
Plug and Play monitor (VESA DDC)
11 Restart Windows.

Display colors are wrong

Check the video connector and the end of the video cable for any pins that might
n
be bent or pushed in.
Make sure the video cable is securely connected to the back of the computer.
n
Make sure that the video cable is not damaged.
n
Restart the system (leaving the monitor on).
n

Picture is fuzzy

Adjust the contrast and brightness controls to improve the display image. See the
"Adjusting display settings" section of this guide for more information.
14
Using Your LE500 Monitor
.
TRL
. Windows starts in a "safe mode," which means that most drivers
then select
Settings
Display
tab.
Settings
. The Advanced Display Properties window opens.
tab.
Monitor
. The Select Device window opens.
, then
Control Panel
icon. The Display Properties window opens.
by following the on-screen instructions.
. The Control Panel window