IgniteNet Spark AC750 Quick Start Manual page 2

Follow the steps in this guide to install the AP in your network.
Caution:
that are trained in the installation of radio transmitting equipment. The user is
responsible for compliance with local regulations concerning items such as
antenna power for instance. Therefore, it is recommended to consult a professional
contractor knowledgeable in local radio regulations prior to equipment
installation.
1. Unpack the AP
Unpack the AP and check the package contents.
◆
Cloud-Enabled Enterprise Access Point
Spark AC750, AC750-3AF, N300, or N300-3AF
◆
Mounting plate
◆
Mounting kit — 4 screws, 4 wall plugs, and 4 rubber feet
◆
Universal AC/DC power adapter
◆
Documentation —Quick Start Guide and Regulatory and Safety Information
2. Mount the AP Using the AP on a desktop
If the AP is not mounted on a wall or on the ceiling, place the provided rubber feet
on the AP.
1
1
The planning and installation of the AP requires professional personnel
– 2 –
Quick Start Guide
Desktop Mounting
Place the provided rubber feet over
1
1
the four screw holes.
1