Table of Contents
Advertisement
Bottles with a nozzle cap:
4
Remove the cap from the noz-
zle.
Connect the nozzle to the
5
valve.
Screw the end of the nozzle clock-
wise as far as possible.
The bottle should hang vertically
without contacting the ground. If
the bottle does not hang vertically,
move the vehicle so that the tire
valve is located properly.
Remove the cap from the bot-
6
tle.
Pull the hose out from the com-
7
pressor.
UK_AURIS/AURIS_HV_EE (OM12G88E)
7-2. Steps to take in an emergency
687
7
Advertisement
Table of Contents
