Toyota AURIS HV Owner's Manual page 596

596
6-3. Do-it-yourself maintenance
CAUTION
 Replacing light bulbs
Turn off the lights. Do not attempt to replace the bulb immediately after

turning off the lights.
The bulbs become very hot and may cause burns.
 Do not touch the glass portion of the light bulb with bare hands. When it is
unavoidable to hold the glass portion, use and hold with a clean dry cloth
to avoid getting moisture and oils on the bulb.
Also, if the bulb is scratched or dropped, it may blow out or crack.
 Fully install light bulbs and any parts used to secure them. Failure to do so
may result in heat damage, fire, or water entering the headlight unit. This
may damage the headlights or cause condensation to build up on the lens.
 Vehicles with discharge headlights:
While the headlights are turned on, and
for a short time after they have been
turned off, metal components at the rear
of the headlight assembly will be
extremely hot. To prevent burns, do not
touch these metal components until you
are certain they have cooled down.
UK_AURIS/AURIS_HV_EE (OM12G88E)
Metal
compo-
nents