Table of Contents
Advertisement
538
6-3. Do-it-yourself maintenance
How to initialize the tire pressure warning system
Except hybrid model
Park the vehicle in a safe place and turn the engine switch off.
1
Initialization cannot be performed while the vehicle is moving.
Adjust the tire inflation pressure to the specified cold tire inflation
2
pressure level. (P. 750)
Make sure to adjust the tire pressure to the specified cold tire inflation
pressure level. The tire pressure warning system will operate based on
this pressure level.
Vehicles with a smart entry & start system: Turn the engine
3
switch to IGNITION ON mode.
Vehicles without a smart entry & start system: Turn the engine
switch to the "ON" position.
Open the glove box. Press
4
and hold the tire pressure
warning reset switch until the
tire pressure warning light
blinks slowly 3 times.
Vehicles with a smart entry & start system: Wait for a few minutes
5
with the engine switch in IGNITION ON mode and then turn the
engine switch off.
Vehicles without a smart entry & start system: Wait for a few min-
utes with the engine switch in the "ON" position and then turn the
engine switch to the "ACC" or "LOCK" position.
UK_AURIS/AURIS_HV_EE (OM12G88E)
Advertisement
Table of Contents
