TP-Link NC450 User Manual page 44

Reboot: Click Reboot

will not change the camera's setting. After rebooting, you need to log in to this page again.
Backup: Click Backup

file to your specified location.
Browse: Click Browse

Restore: Click Restore, and then the camera will start rebooting. The settings will be

restored to the previous configuration.
Reset: Click Reset

while resetting. After resetting, you need to add the camera to your TP-Link ID again, find
out the IP address of your camera (refer to
default username and password (admin/admin) to log in to this web management page.
Browse: Click Browse

Update: Before the update, download the latest firmware from the product page at

http://www.tp-link.com, and then extract the file. Click
firmware upgrade file. Then click
version. Wait for the upgrading process to complete, and the camera will reboot
automatically.
and then click Reboot
and follow the instructions on the browser to save the setting data
to locate the saved backup file.
to restore the camera to its factory defaults. Don't turn off the camera
to locate the saved upgrade file.
Upgrade
on the pop-up screen to confirm. The reboot
4.1 Log in to Your
Browse
to update the camera's software to the latest
42
NC450
Camera), and then use the
and select the downloaded