Advanced > Notification Delivery - TP-Link NC450 User Manual

4.4.9 Advanced > Notification Delivery
Notification Delivery settings are available only after the motion detection or sound detection
function is enabled. It is used to inform you immediately by sending the snapshots triggered by
a detected motion or sound to the specified FTP server and email addresses.
FTP
Select FTP, and you can configure your camera to send snapshots to a specified FTP server on
the following screen:
FTP Server/Port:

the FTP server that you will be connecting to. The port is 21 by default.

Note:
The FTP server you set and the camera should be in the same LAN.
Enter the IP or the domain (IP/domain without prefix ftp://) and the port of
33
NC450