Related Manuals for Pentair KREEPY KRAULY LIL SHARK
Summary of Contents for Pentair KREEPY KRAULY LIL SHARK
- Page 1 KREEPY KRAULY ‘LIL SHARK ® ™ ABOVEGROUND POOL CLEANER INSTALLATION AND USER’S GUIDE IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS...
- Page 2 Unless expressly noted, names and brands of third parties that may be used in this document are not used to indicate an affiliation or endorsement between the owners of these names and brands and Pentair Water Pool and Spa, Inc.
- Page 3 Attention User: This manual contains important information that will help finish or the vinyl liner, Pentair Aquatic Systems disclaims any liability for you in operating and maintaining this pool cleaner. Please retain it for future repairs or replacement to any of these structures or components of the reference.
- Page 4 Pentair Aquatic Systems disclaims any liability for Please be aware that over time, deterioration, discoloration and brittleness...
- Page 5 PREPARATION OF THE POOL STEP 1: STEP 2: Preparation of the Pool Check Parts A. Before operation of cleaner, make the A. Make sure you have all parts to pool following preparations before proceeding: cleaner. 1. Chemically balance the pool water. 2.
- Page 6 STEP 5: Connect Hose To Skimmer With filter system running, connect hose to skimmer or to suction port. See below for hose connections. 929 0594 Hose Connections Follow drawing that most closely resembles your skimmer installation. Fig. 4. Skimmer with Skimmer Vacuum Port Hose...
- Page 7 STEP 6: Size The Hose For best results: With the cleaner running and submerged, pull hose to furthest end of the pool. The hose should extend to the furthest point in the pool, plus one section. Add or remove hose sections as needed. Note: The hose is designed for use with the cleaner.
- Page 8 TROUBLESHOOTING Problem Corrective Action Cleaner moves slowly or not at all. • Backwash and clean filter. Empty all baskets. • Clear debris from oscillator or hose. • If hoses from pool to filter and pump are less than 1-1/2” diameter, replace with 1-1/2” diameter hoses. •...
- Page 9 REPLACEMENT PARTS ‘Lil Shark Aboveground Pool Cleaner Illustrated Parts List ™ Item Part No. Part Description GW9012 Swivel Assembly Pool Cleaner Body (with Bristles) 41100-0027 Oscillator Impact Bumper (Pkg of 2) GW9004 Oscillator Seals (Pkg of 2) GW9003 Oscillator Kit (Includes Seals) GW9002 Axle Shaft 371514Z...
- Page 10 NOTES SAVE THESE INSTRUCTIONS ‘LIL SHARK Aboveground Pool Cleaner Installation and User’s Guide ™...