Table of Contents
Advertisement
[Operation via recorder's main monitor]
Business intelligence function
Face matching function
When the face matching function is activated, it detects facial features of people in images, matches them
against similar facial features recorded earlier or contained in live images, and issues an alarm when a match is
found.
Important:
• Face matching does not work while the setup window is displayed.
• Face matching alarm does not apply event recording.
• Immediately after startup or after transferring to an operational screen from the setup page, it takes 10 sec-
onds at maximum until the face registration function to be activated.
• When several people appear in images at the same time, face matching may take time, or it may not be
possible to match all facial images.
• A detected person displayed on the face matching result window may sometimes not be the same as the
one who has registered the facial image.
Face matching alarm actions
When a face matching alarm occurs, the following notifications will be issued:
An alarm indication and the name of the facial image (name of detected person) will be displayed in the
status display area.
The latest face matching result will be displayed
Matched facial image
Note:
• When the face matching alarm is detected in wide view, the operation panel will open automatically.
• When copying or playing back images, the face matching result window will not be displayed.
• Up to 16 facial images can be memorized. It is possible to switch between facial images by clicking the
[Previous]/[Next] buttons. The face image is cleared by logout operation or power-off.
Other alarm actions
• The alarm indicator on the front panel of the recorder will blink.
• The buzzer sounds.
• A face matching alarm is output from a terminal on the rear panel (if set up).
• An alarm e-mail is sent (if set up).
Registered facial image
19
19
Advertisement
Table of Contents
