Table of Contents
Advertisement
[Setup via recorder's main monitor]
Set up target areas [Face matching / Age and gender
judgment], [People counting]
Configure the setting of target areas to enhance the accuracy of the statistical processing.
While displaying live images, up to 4 people counting areas and up to 4 face matching / age and gender judg-
ment area can be set up. At the default, the whole camera image is targeted for the statistical processing. It is
possible to enhance the accuracy of the statistical processing by setting up the areas.
Face matching / Age and gender judgment
[Face matching / Age and gender judgment]
Register the areas to perform face matching / age
and gender judgment. The result of the face detection
that is performed in this area will be targeted for the
face matching and the statistical processing accord-
ing to ages and genders. The settings are the same
as the area settings for face matching that is per-
formed on [Face registration]. (☞ Page 14)
Step 1
Click the [Fix area >] button of "Face matching / Age
and gender judgment" on the business intelligence
setup page (☞ Page 11).
→ The window for setting up the face matching /
age and gender judgment area will be displayed.
The following are displayed on the image display area.
Green frame: Face detection (The frame will be
Aqua frame: People counting area (☞ Page 16)
Step 2
Click the [Fix area] button next to the respective face
matching / age and gender judgment area. A maxi-
mum of 4 areas can be registered to allow for polygo-
nal shapes.
Important:
• Configure the setting so that the people counting
area is included in the face matching / age and
gender judgment area.
updated every second.)
Step 3
On the displayed image, click the top left corner and
bottom right corner of the square that will become
the area.
→ The designated area will turn gray and will be reg-
istered as a face matching / age and gender judg-
ment area. If even part of the green frame is over-
lapped with the face matching / age and gender
judgment area, the portion within a green frame
will be targeted for the statistical processing.
Step 4
To complete the settings, click the [Back] button.
→ The screen returns to the business intelligence
setup page.
Note:
• As each area will be set up to match the image
display area divided into 16×16 segments, the top
left and bottom right detection areas may not be
exactly as designated.
• To delete a registered area, click the [Delete area]
button for the area to delete.
15
Advertisement
Table of Contents
