Advertisement
10
3
Click Start and then click Programs.
Click Direct Connect Configuration Software
The main window opens.
The LED indicator on the adapter changes from flash-
ing red to steady orange, indicating that the adapter and
computer are communicating. If the indicator is not
steady orange, see Solving problems on page 22.
4
Note: The Direct Connect adapter can be set up for
only one camera at a time. If you have multiple adapt-
ers set up for different cameras, you may want to label
each adapter to indicate its current setup.
Click the Camera button to display a list of compatible
digital cameras.
If you do not see your camera listed, see Obtaining
configuration files for additional cameras and printers
on page 29.
Click your camera model and then click the OK button to
send the camera setup information to the adapter.
Advertisement
