Advertisement
To print ...
all pictures
stored in camera
index print(s)
Note: You can cancel printing by pressing the Picture
Select/Cancel Print button.
Some digital cameras cannot display pictures on their
LCD screen while connected to the Direct Connect
adapter. If your camera does not display pictures while
connected, use these steps to print a single picture:
Disconnect the Direct Connect cable from the camera.
Set the camera to the Review mode.
Your camera may have a different name for this mode.
See the camera instructions.
Display the picture you want to print.
Reconnect the Direct Connect cable to the camera.
Set the camera to the PC Connect mode.
Press the Single Print button.
Then ...
Press the Print All button.
Press the Print Index button.
21
Advertisement
