Setting up the Direct Connect adapter
Before printing with the adapter for the first time, you
need to configure it with the Direct Connect Configu-
ration Software. You can also use the software to
change the setup later.
Using the software, you define:
the digital camera you are using.
the printer you are using.
the option of adding a watermark to your pictures.
the picture format: Best Fit to Page or Fill Entire Page.
1
Start your computer.
Insert the Direct Connect CD-ROM in your
CD-ROM drive.
Click the Start button and then click Run.
Type x:setup.exe (substitute the letter of your CD-
ROM drive for x) and click OK.
Follow instructions on your screen to complete the
installation.
Remove the CD-ROM from your CD-ROM drive.
8