Advertisement
LED state
Off
Steady orange
Flashing green
Flashing orange
Alternating green and
orange
Alternating red and
orange
Alternating red and
green
Flashing red
26
Meaning
No power to adapter
Communication with
printer and camera
established
Printing
Printer out of film
No communication
with camera
No communication
with printer
No communication
with camera or printer
Communication or soft-
ware error
Suggested action
Connect adapter to
power supply (page 18).
Print when ready (nor-
mal indication).
Wait for picture to eject
from printer (normal
indication).
Insert new film pack in
ColorShot printer.
Make sure camera is in
correct mode for print-
ing. (See Printing steps
on page 20.)
Make sure printer is con-
nected properly and
printer LED is lighted
(page 18).
Make sure camera is in
correct mode for print-
ing. (See Printing steps
on page 20.) Make sure
printer is connected
properly and printer
LED is lighted (page 18).
Unplug adapter from
power supply and recon-
nect. Repeat operation
just completed.
Advertisement
