Advertisement
20
Note: If the Direct Connect LED indicator displays
flashing orange before or during these steps, the Color-
Shot Photo Printer is out of film. When this happens,
load a new pack of film as shown in Figure 9. (The film
cover ejects when you close and latch the film door.
Turn on the camera.
See your camera instructions.
Set the camera to the PC Connect mode. (Your camera
may use a different name for this mode.)
The adapter LED shows a steady orange, indicating
communication among the adapter, camera and printer.
To print ...
a single picture
Then ...
Press the Picture Select
button on the Direct Con-
nect adapter to scroll
through the pictures until
the one you want to print
appears. (Press the button
twice rapidly to scroll
backward.)
Press the Single Print But-
ton.
Advertisement
