NN-CS597S
6.11. Oven circuit breaker
To install the oven circuit breaker inside the cover:
1. Ensure that the oven circuit breaker is in the right direction
as shown in the illustration above (Do not install upside
down).
2. Before tightening 2 screws, pull the oven circuit breaker
harness (U) in and out slightly to confirm if the lead wire(s)
move freely and are not pinched or pressed under the oven
circuit breaker cover (If the lead wire(s) are pinched or
pressed the insulation of the wire(s) might be damaged and
will cause electric shock).
3. Make sure that the same side input and output lead wires
are same color while connecting the terminals (The left side
lead wires are gray, and the right side lead wires are blue).
Do not mix up the lead wire color.
22