3. Press the "Up" or "Down" arrows to adjust the hours or minutes, then select the
"AM" or "PM" button on the touchscreen. You can also select 12hr or 24hr format by
pressing the desired button on the touchscreen.
4. Once the time is set press the "Done" button on the touchscreen to exit the time
screen.
NOTE:
In the Clock Setting Menu you can also select Display Clock. Display Clock turns the
clock display in the status bar on or off.
Equalizer, Balance And Fade
1. Push the MORE button on the faceplate below the display then press the "Setting"
button on the touchscreen.
2. Scroll down and press the "Audio" button on the touchscreen to open the Audio
menu.
3. The Audio Menu shows the following options for you to customize your audio settings.
Equalizer
•
Press the "Equalizer" button on the touchscreen to adjust the Bass, Mid and Treble.
Use the "+" or "-" button on the touchscreen to adjust the equalizer to your desired
settings.
Balance/Fade
•
Press the "Balance/Fade" button on the touchscreen to adjust the sound from the
speakers. Use the arrow buttons on the touchscreen to adjust the sound level from
the front and rear or right and left side speakers. Press the Center "C" button on the
touchscreen to reset the balance and fade to the factory setting.
Speed Adjusted Volume — If Equipped
•
Press the "Speed Adjusted Volume" button on the touchscreen to select between OFF,
1, 2 or 3. This will decrease the radio volume relative to a decrease in vehicle speed.
Loudness
•
Press the "Loudness" button on the touchscreen to select the Loudness feature. When
this feature is activated it improves sound quality at lower volumes.
Surround Sound — If Equipped
•
Press the "Surround Sound" button on the touchscreen, select On or Off followed by
pressing the back arrow button on the touchscreen. When this feature is activated, it
provides simulated surround sound mode.
ELECTRONICS
75