Simrad NSS evo3 Quick Start Manual

Front panel

No. Description
1 Touch screen.
Pages/Home key - press to open the Home page for page selection and setup
2
options.
WheelKey - user configurable key, refer to Operator manual.
Default without autopilot in system: Short press toggles between panels on split screen.
3 Long press maximizes active panel on split screen.
Default with autopilot in system: Short press opens autopilot controller and places
autopilot in standby mode. Long press toggles between panels on split screen.
Menu key - press to display the active panel's menu.
4
Rotary knob - turn to zoom or scroll the menu, press to select an option.
5
Enter key - press to select an option or save settings.
6
Exit key - press to exit a dialog, return to previous menu level, and clear cursor from
7
panel.
MOB keys - press simultaneously the Enter and Exit keys to create a MOB (Man Over
8
Board) at the vessel's position.
Arrow keys - press to activate cursor or to move cursor.
9
Menu operation: press to navigate through menu items and to adjust a value.
Mark key - press to place waypoint at vessel position, or at cursor position when cursor
10
is active.
Power key - press and hold to turn the unit ON/OFF. Press once to display the System
11
control dialog, additional presses will toggle through 3 default dimming levels.
12 Card reader door
NSS evo3
Quick Start Guide
3
6
10
12
1
2
4
5
7
8
9
11
12
NSS evo3 | QuickStart Guide - EN
EN
|
1