NETGEAR C7000v2 Quick Start Manual page 2

You can use this diagram to connect your router or follow the detailed instructions in this booklet.
1. Collect your cable Internet provider information.
Collect your cable account number, account phone number,
and login information (your email address or user name and
password).
2. Turn off existing modems and routers.
If you are replacing a modem that is currently connected in
your home, unplug the modem and plug the new modem
router into the same outlet.
3. Connect a coaxial cable.
Use a coaxial cable that is
provided by your cable company
to connect the cable port on the
modem router to a cable wall
outlet or a line splitter.
Make sure that the cable is tightly
connected.
Note: If Comcast XFINITY is your
cable Internet provider, Comcast
XFINITY recommends connecting your modem router
directly to a cable wall outlet.
4. Connect the power adapter.
When the startup complete, the Power LED
solid green.
5. Wait for the modem router to come online.
When the modem router comes online, the Internet LED
stops blinking and lights solid green.
This process might take up to 10 minutes.
6. Connect a computer or mobile device to the
modem router.
To connect with WiFi, use the WiFi network name and
password on the modem router label.
To connect using a wired connection, use an Ethernet
cable to connect a computer to an Ethernet port on the
modem router.
Reboot the computer.
7. Log in to the modem router.
Launch a web browser and enter www.routerlogin.net
or http://192.168.0.1 in the address field of the web
browser.
When prompted to log in, enter admin for the user name
lights
and password for the password, change the password,
enter security questions and answers.
8. Activate your Internet service.
For information about how to activate your Internet service,
see Activate Your Internet Service on page 5.