Installing Rhub3908 Cables; Requirements For Cable Layout - Huawei DBS3900 Installation Manual

LampSite
Installation Guide
Figure 5-26 Installing an RHUB3908 on a wall
----End

5.4 Installing RHUB3908 Cables

This section describes how to install cables for an RHUB3908.

5.4.1 Requirements for Cable Layout

Cables must be routed according to the specified cabling requirements to prevent signal
interference.
General Requirements for Cable Layout
中国标准
Issue 08 (2015-01-15)
NOTE
As shown in the preceding figure, when the RHUB3908 is placed against the wall, ensure that the
RHUB3908 panel is vertical to the ground and the PSU is on the lower part of the RHUB3908 panel.
NOTE
If a cable listed below is not required, skip the requirements for routing the cable.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Installing an RHUB3908
31