LampSite
Installation Guide
Figure 6-27
Daughter Board.
Figure 6-27 pRRU3901 cable connection (1)
(1) Ethernet cable
6.5.5 pRRU3901 cable installation process
This section describes the process of installing pRRU3901 cables.
Figure 6-28
Figure 6-28 pRRU3901 cable installation process
6.5.6 Installing an Ethernet Cable
This section describes how to install an Ethernet cable.
Issue 08 (2015-01-15)
shows the cable connection when the pRRU3901 is configured with only one RF
NOTE
The Extender can be used to lengthen the distance between the RHUB and the pRRU connected using the
Ethernet cable. If the Extender is used, the Ethernet cable is divided into two parts, one between the RHUB
and the Extender and the other between the Extender and the pRRU.
shows the process of installing pRRU3901 cables.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Installing a pRRU3901
(2) RF jumper
80