Parking Brake Adjustment - Wacker Neuson RD 12A Operator's Manual

Operation

4.22 Parking Brake Adjustment

See Graphic: wc_gr002953
4.22.1 Unscrew brake lever knob (42) until brake can be applied with
4.22.2 Start roller on level ground and try to travel forward and reverse with
4.22.3 When machine no longer moves with brake set, stop machine, turn
The parking brake is located on the rear drive motor drum support, and
is used to prevent the roller from moving when the engine is turned off.
Adjust brake for proper holding force as follows:
moderate force (approx. 30 lbs.).
brake applied. If roller drives through brake, stop machine, tighten
lever knob one turn and repeat process.
knob one more turn and brake is properly set.
55
54
61
F N
R
10
15
42
wc_gr002953
44
RD 12A
wc_tx001071gb.fm