Preparing The Machine For First Use; Position Of The Operator; Recommended Fuel - Wacker Neuson RD 12A Operator's Manual

RD 12A
4.3

Preparing the Machine for First Use

Preparing for first use
4.3.1
4.3.2
4.3.3
4.3.4
4.3.5
4.3.6
4.4

Position of the Operator

4.5

Recommended Fuel

wc_tx001071gb.fm
To prepare your machine for first use:
Make sure all loose packaging materials have been removed from the
machine.
Check the machine and its components for damage. If there is visible
damage, do not operate the machine! Contact your Wacker Neuson
dealer immediately for assistance.
Take inventory of all items included with the machine and verify that
all loose components and fasteners are accounted for.
Attach component parts not already attached.
Add fluids as needed and applicable, including fuel, engine oil, and
battery acid.
Move the machine to its operating location.
Safe and efficient use of this machine is the operator's responsibility.
Full control of the machine is not possible unless the operator
maintains the proper working position at all times.
While operating this machine, the operator must:
• be seated in the operator's seat facing forward
• wear the seat belt, properly adjusted and latched
• have both feet on the control deck
• have one hand on the steering wheel at all times
• have the other hand free to operate the controls as needed
The engine requires regular grade unleaded gasoline. Use only fresh,
clean gasoline. Gasoline containing water or dirt will damage fuel
system. Consult engine owner's manual for complete fuel
specifications.
27
Operation