Show Acct Tacacs - Seiko SmartCS NS-2250 Command Reference Manual

5.17 Authentication/accounting function display commands

show acct tacacs

Function Display the settings for TACACS+ accounting.
Format show acct tacacs
Parameters None
Usage example
Execution example
(c)NS-2250> show acct tacacs
<acct tacacs+ information>
Auth_deny_stop : remote
Task_id : 3
<tacacs+ server 1>
IP address : 10.1.1.1
Port number : 49
Password : stored
Timeout : 5
<tacacs+ server 2>
IP address : 10.1.1.2
Port number : 49
Password : stored
Timeout : 5
Explanation <acct tacacs+ information>
<tacacs+ server>
show acct tacacs
Displays the accounting statistics of the RADIUS server.
Auth deny stop
Displays the sending method of accounting STOP packets used when authen-
tication fails.
Task id
Displays the last task ID of the account.
IP address
Displays the IP address of the TACACS+ server.
Port number
Displays the port number of the TACACS+ server.
Password
Display the secret key setting of the TACACS+ server.
Timeout
Displays the timeout time for the TACACS+ server. The unit is one second.
Chapter 5 Status display commands
[Normal user][Administrator]
342