Set Auth Radius Server Timeout - Seiko SmartCS NS-2250 Command Reference Manual

4.28 Authentication setting commands

set auth radius server timeout

Function Set the timeout time for the response packet sent back from the RADIUS authentication
server.
set auth radius server { 1 | 2 } timeout time
Format
{ 1 | 2 }
Parameters
timeout time
Usage example To set 10 seconds for the timeout time.
Specify 1 or 2 for the identification number of the RADIUS authentication server.
Specify the timeout time for the response packet sent back from the RADIUS
authentication server. You can specify from 1 through 30 seconds.
This parameter is set to "5" by default.
set auth radius server 1 timeout 10
201
Chapter 4 Setting commands
[Administrator]