Seiko SmartCS NS-2250 Command Reference Manual page 24

2.1 Setting command overview
Class
terminal output control
setting commands
Time zone setting com-
mands
Temperature sensor set-
ting commands
Table 2-1: Setting command list(continued)
Command
set acct tacacs server
timeout
unset acct radius server
addr
unset acct radius server
nas id
unset acct tacacs server
addr
set terminal default
editing
set terminal default
height
set terminal default
width
set terminal default
page
set terminal default
prompt
set terminal default re-
disp
set terminal default
timeout
set timezone
set temperature adjust
24
Description
Set the timeout time for the response packet
sent back from the TACACS+ server (ac-
counting).
Remove the IP address of the RADIUS ac-
counting server.
Remove the NAS-ID attribute notified to the
RADIUS accounting server.
Remove the IP address of the TACACS+
server (accounting).
Set the default setting for enabling or dis-
abling terminal line editing.
Set the default setting for the number of lines
on one page of the terminal.
Set the default setting for the number of char-
acters on one line of the terminal.
Set the default setting for enabling or dis-
abling the terminal paging function.
Set the default setting for the display format
of the terminal prompt.
Set whether or not to redisplay by default
the previously entered command string on the
next prompt screen after a command input er-
ror has occurred.
Set the default value for the terminal auto-
matic logout time.
Set the time zone.
Set the temperature correction value of the
temperature sensor.
Chapter 2 Command list