Section 3: Pre-travel information
OCCC Label (Occupant & Cargo Carrying
Capacity):
The upper portion of this yellow
label is federally required and indicates the total
combined weight value of occupants and cargo
that may be placed in or on your motor home as it
was manufactured and weighed before leaving the
factory.
Upper section Federal OCCC weight label
This label also indicates the number of safety seat
belts that have been installed at the factory. Additions
or other changes made to the motor home after it left the
factory will affect (reduce) the OCCC.The lower portion
of the label is provided voluntarily and indicates the
weight value of the motor home as it was manufactured
and weighed before leaving the factory. This label also
Federal Certification Label
indicates the GCWR of the completed motor home.
The Federal Certification Label is required by the
government to verify the RV complies with all motor
vehicle standards for Canada and the United States. It
includes the following information: Manufacturer name,
VIN, GVWR, GAWR (front/rear), tire & rim sizes and
cold tire inflation pressures.
Lower section Federal OCCC weight labels
The motor home towing and braking label is located on the rear bumper above the hitch
receiver. Be sure to read and follow the guidelines and information stated on this label.
Refer to the Chassis Guide for additional information.
Towing & braking warning label
For more information: Consult a hitch specialist or your dealer for assistance when
preparing your motor home for towing a vehicle or trailer.
30
Maintenance Record
Table of Contents