Section 2 Installation; Pre-Installation Check - Will Burt Position It RACK MOUNT CONTROLLER Operator's Manual

Section 2
This section describes the installation of the system and provides general procedures that must
be followed to ensure a successful installation. Use care to follow all precautions while installing.

2.1 Pre-Installation Check

Before installing the system, ensure:

That all appropriate precautions from the operator's manual (Section 1.3) are followed.

That the following warnings are understood and followed:
Safety Instruction – Read Manual! Before attempting any installation, ensure all installers
have fully read and understood this manual.
Safety Instruction – Electrical Hazard! The PositionIt Rack Mount Controller is a mains
powered device and contains dangerous voltages inside.
Safety Instruction – Installation! Ensure the complete system is safe and unable to move
before any installation or maintenance work is carried out on, or around, this system.
Safety Instruction – Qualified Engineers! All electrical and mechanical work must be carried
out by a suitably qualified engineers.
TP-5362301-B
July 2017
Installation
P I R M
OSITION T ACK OUNT
C
ONTROLLER
2-1