Section 3 Operation; Pre-Operation Check; Switching On The System; Figure 3-1 Front Panel Of Positionit Rack Mount Controller - Will Burt Position It RACK MOUNT CONTROLLER Operator's Manual

Section 3
This section describes the operation of the system. Use care to follow all precautions while
operating.

3.1 Pre-Operation Check

Before operating the system, ensure:

That all appropriate precautions from the operator's manual (Section 1.3) are followed.

Ensure that the following warnings are understood and followed:
Safety Instruction – Installation! Ensure all aspects of the installation have been carried out
correctly and are safe before attempting to operate the system.
Safety Instruction – Operation!
first make sure it is safe to do so.

3.2 Switching on the System

The illuminated Power Rocker Switch (Figure 3-1) on the front panel of the Rack Mount controls
both the power for the Rack Mount Controller and also to the positioner.
Once switched on, wait for (10) seconds before attempting any control inputs. This will allow the
system to initialize fully.
Power Rocker
Switch
TP-5362301-B
July 2017
Operation
Before moving the PositionIt positioner the operator must

Figure 3-1 Front Panel of PositionIt Rack Mount Controller

P I R M
OSITION T ACK OUNT
C
ONTROLLER
3-1