Yale SR-310 User Manual page 20

8
(22)
Changing the Batteries
eries - (IT) Sostituzione batterie - (DE) Batteriewechsel - (NO) Batteribytte -
DK) Batteriskift.
Key Pad Battery Change
When the battery is low the LED will flash when any key is
pressed. The battery is changed as follows:
CHANGE
BATTERY
(GB) Changing batteries - (IT) Sostituzione batterie - (DE) Batteriewechsel - (NO) Batteribytte -
(SE) Batteribyte - (DK) Batteriskift.
1. Disarm
SR-KP
SR-PVC
SR-DC
4. Insert new battery
(slot under 2 tabs) &
click in place.
Press a number key and check that the LED lights. If the
LED lights the new battery installation is successful.
SR-PC
SR-KF
Panic Button Battery Change
2 x 1.5v AA
When the battery is low the LED will glow dimly when the
button is pressed. The battery is changed as follows:
SR-SD
SR-PIR / PETPIR
1.
SR-PB
Unscrew
Press the button and check that the LED lights. If the LED
lights the new battery installation is successful.
20
(GB) Changing batteries - (IT) Sostituzione batterie - (DE) Batteriewechsel - (NO) Batteribytte -
(SE) Batteribyte - (DK) Batteriskift.
2. Unscrew &
3. Remove old
remove cover
battery
CR 2032
3 x 1.5v AA
(Lithium)
5. Replace cover.
CR 2032
CR 2032
3 x 1.5v AA
CR 2032
3 x 1.5v AAA
2. Open case 3. Remove
old battery
SR-PVC
CHANGE
BATTERY
Smoke Detector Battery Change
When the battery is low the LED will flash accompanied by
a low volume beep once every 30 seconds.
SR-KF
CR 2032
(23)
1.
SR-SD
Rotate anti-
clockwise to
remove
CR 2032
Press the test button and check that the LED lights and the
sounder chimes to confirm the new battery installation is
SR-PB
successful.
2 x 1.5v AA
3 x 1.5v AAA
4. Insert new
battery & replace
cover.
3 x 1.5v AA
(Lithium)
(cont.)
CR 2032
3 x 1.5v AA
2. 3. 4.
Replace
Remove
Fit & rotate
batteries
clockwise to lock.
old
batteries
CR 2032