Table of Contents

Advertisement

Adjusting the volume level
Be sure to adjust the volume for each connected
audio device before playback.
1 Turn down the volume on the unit.
2 Press (SRC) repeatedly until "AUX" appears
on the main unit.
"AUX FRONT IN" appears.
3 Start playback of the portable audio device at a
moderate volume.
4 Set your usual listening volume on the unit.
5 Press (SYSTEM SETUP).
6 Press M/m to select "AUX-LVL," then press
(ENTER).
7 Press M/m to adjust the input level.
The input level is adjustable in single steps,
between –6 and +18.
8 Press (ENTER).
The setting is complete.
With the main unit
Press (SOURCE) instead of (SRC), rotate the volume
control dial instead of pressing M/m.

CD changer

M/m
Z
Z
X
SRC
Selecting the changer
1 Press (SRC) repeatedly until "CDC" appears.
2 Press (MODE) repeatedly until the desired
changer appears.
Unit number
Disc number
Playback starts.
With the main unit
Press (SOURCE) instead of (SRC).
ENTER
PL
MODE
Skipping albums and discs
1 During playback, press M/m.
Press M/m
To skip
album
and release (hold for a
moment).
album
within 2 seconds of first
continuously
releasing.
discs
repeatedly.
discs
then, press again within 2
continuously
seconds and hold.
With the main unit
Use (3)/(4) (ALBUM –/+) instead of M/m.
Repeat and shuffle play
REP
1 During playback, press (1) (REP) or (2)
(SHUF) on the main unit repeatedly until the
desired setting appears.
Select
To play
REP DISC*
disc repeatedly.
SHUF
tracks in the changer in random
CHANGER*
order.
* When one or more CD changers are connected.
To return to normal play mode, select "REP
OFF" or "SHUF OFF."
SHUF
43

Advertisement

Chapters

Table of Contents
loading

Table of Contents