Adjusting The Audio Output Level - Dvd Level; Magnifying Pictures - Sony MEX-DV1000 Operating Instruction
Hide thumbs
Also See for MEX-DV1000:
- Operating instructions manual (300 pages) ,
- Installation/connections (2 pages) ,
- Service manual (92 pages)
Table of Contents
Advertisement
Adjusting the audio output level
— DVD level
You can adjust the audio output level for a DVD
recorded in Dolby Digital format, to reduce the
volume level differences between disc and
source.
1
During playback, press
(SYSTEM SETUP).
The system setup item appears on the main
unit.
2
Press M/m to select “DVD-LVL,” then
press (ENTER).
3
Press m to set to “ADJST ON,” then
press (ENTER).
4
Press M/m to adjust the output level.
The output level is adjustable in single steps,
between –10 and +10.
5
Press (ENTER).
The setting is complete.
With the main unit
Rotate the volume control dial instead of pressing M/
m.
Magnifying pictures
*
* Asian model only.
VISUAL
</M/m/,
SETUP
ENTER
Z
Z
PL
X
You can magnify pictures.
1
During playback, press
(VISUAL SETUP).
The play mode menu appears.
2
Press M/m to select
(CENTER
ZOOM), then press (ENTER).
The current option appears.
12 ( 67 )
PLAY
018 ( 034 )
DVDVIDEO
T 1:35:55
x1
x1
x1.6
3
Press M/m to select the desired option
(×1, ×1.6*), then press (ENTER).
* The picture may become grainy.
The picture is magnified.
To scroll the picture, press </M/m/,.
To restore the original scale, select “×1” in step
3.
To hide the play mode menu, press
(VISUAL SETUP).
Notes
• Depending on the disc, you may not be able to
change the magnification.
• When you resume playback, the picture returns to its
original scale.
Page 24
Advertisement
Chapters
Table of Contents
