Table of Contents
Advertisement
20
www.electrolux.com
12.1 What to do if...
Problem
The oven does not heat up. The oven is deactivated.
The oven does not heat up. The clock is not set.
The oven does not heat up. The necessary settings are
The oven does not heat up. The automatic switch-off is
The oven does not heat up. The Child Lock is on.
The oven does not heat up. The fuse is released.
The lamp does not operate. The lamp is defective.
The display does not show
the time during the off sta-
tus.
The core temperature sen-
sor does not operate.
It takes too long to cook the
dishes or they cook too
quickly.
Steam and condensation
settle on the food and in the
cavity of the oven.
The display shows "C2".
The display shows "C3".
Possible cause
not set.
activated.
The display is deactivated.
The plug of the core tem-
perature sensor is not cor-
rectly installed into the
socket.
The temperature is too low
or too high.
You left the dish in the oven
for too long.
You want to start the De-
frost or Catalysis function,
but you did not remove the
core temperature sensor
plug from the socket.
The cleaning function does
not operate. You did not
fully close the door, or the
door lock is defective.
Remedy
Activate the oven.
Set the clock.
Make sure that the settings
are correct.
Refer to "Automatic switch-
off".
Refer to "Using the Child
Lock".
Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse releases
again and again, contact a
qualified electrician.
Replace the lamp.
Touch
and
at the
same time to activate the
display again.
Put the plug of the core
temperature sensor as far
as possible into the socket.
Adjust the temperature if
necessary. Follow the ad-
vice in the user manual.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the cook-
ing process ends.
Remove the core tempera-
ture sensor plug from the
socket.
Fully close the door.
Advertisement
Table of Contents
