Table of Contents
Advertisement
Problem
The display shows an error
code that is not in this ta-
ble.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows "Demo".
12.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is on
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
13. INSTALLATION
WARNING!
Refer to Safety chapters.
Possible cause
There is an electrical fault.
The demo mode is activa-
ted.
the front frame of the appliance cavity. Do
not remove the rating plate from the
appliance cavity.
.........................................
.........................................
.........................................
13.1 Lifting the appliance
To lift the appliance, do not use the door
handle.
ENGLISH
Remedy
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, con-
tact the Customer Care
Department.
1. Deactivate the oven.
2. Touch and hold
the oven activates and
deactivates.
3. Touch and hold
at the same time un-
til an acoustic signal
sounds and "Demo"
goes out.
21
until
and
Advertisement
Table of Contents
