Rear Panel - Pioneer PD-70AE Instruction Manual

> Before Start > Part Names

Rear Panel


1. ANALOG OUT jack: Use an analog audio cable or an XLR cable to connect an integrated
amplifier, for example.
2. AC IN: Connect the supplied power cord.
3. RCA ANALOG OUT switch: Set ON/OFF for output from the ANALOG OUT jack (RCA
jack). When OFF is selected, power supply to the ANALOG OUT jack (RCA jack) is
stopped, and the output of the signal is stopped.
Selecting OFF helps suppress effects of noise on the signal output from the ANALOG
OUT jack (XLR jack).
4. DIGITAL IN OPTICAL/COAXIAL jack: Use a digital optical cable or digital coaxial cable to
connect audio devices, for example.
5. DIGITAL OUT OPTICAL/COAXIAL jack: Use a digital optical cable or digital coaxial cable
to connect an integrated amplifier, for example.
6. CONTROL IN/OUT jack: By connecting Pioneer brand amplifiers and audio devices,
centralized control is possible, for example you can control the amplifiers and audio
devices.
> Install > Playback

  
Advanced Setup | Others

En 5