Ruckus Wireless ZoneDirector 1200 User Manual page 16

Introducing ZoneDirector
ZoneDirector Physical Features
• Front Panel LEDs
Figure 1: ZoneDirector 1200
Buttons, Ports, and Connectors
The following table describes the buttons, ports and connectors on ZoneDirector 1200.
Table 3: ZoneDirector 1200 front panel elements
Label
Reset
10/100/1000 Ethernet
Console
F/D
Front Panel LEDs
The following table describes the LEDs on the front panel of ZoneDirector 1200.
Table 4: ZoneDirector ZoneDirector 1200 LED descriptions
LED Label
Power
16
on page 16
Description
Use the Reset button to restart ZoneDirector.
Two auto negotiating 10/100/1000Mbps Ethernet ports.
RJ-45 Console port for accessing the ZoneDirector command
line interface.
Factory Default button. To reset ZoneDirector to factory default
settings, press and hold the F/D button for at least five (5)
seconds. For more information, refer to
Alternate Factory Default Reset Method
NOTE Resetting ZoneDirector to factory default settings will
erase all configuration changes that you made, except for AP
licenses and SSL certificates.
State Meaning
Solid Green ZoneDirector is receiving power.
on page 323.
Ruckus Wireless ZoneDirector Release 10.0 User Guide