Table of Contents
Advertisement
DRIVER SUPPORT
Parking with Active parking
assistance*
The Active parking assistance (Park Assist Pilot -
PAP) helps the driver park in three steps. The
function can also help the driver to leave a park-
ing space.
NOTE
The PAP function measures the space and
steers the car - the driver's task is to:
•
keep a close watch around the car
•
follow the instructions in the centre dis-
play
•
change gear (reverse/forward)
•
control and maintain a safe speed
•
brake and stop.
PAP can be activated if the following criteria are
met once the engine has been started:
•
No trailer is attached to the car.
•
Speed must be lower than 30 km/h
(20 mph).
NOTE
The distance between the car and parking
spaces should be 0.5-1.5 metres while PAP
is searching for a parking space.
376
Parking
The PAP function parks the car using the follow-
ing steps:
1. A parking space is identified and measured.
2. The car is reversed into the space.
3. The car is positioned into the space - the
system may then request that the driver
changes gear.
Finding and measuring parking spaces
The function can be activated
in the centre display's function
view.
It can also be accessed from
the camera views.
Principle for parallel parking.
Principle for perpendicular parking.
1. Drive no faster than 30 km/h (20 mph) for
parallel parking or 20 km/h (12 mph) for
perpendicular parking.
2. Tap on the
Park In
button in function view.
> PAP searches for a parking space and
checks whether it is big enough.
3. Keep an eye on the centre display - be ready
to stop the car when the graphic and mes-
sage indicate that a suitable parking space
has been found.
> A pop-up window is shown.
4. Select
Parallel parking
or
Perpendicular
parking
and select reverse gear.
* Option/accessory.
Advertisement
Table of Contents
