Table of Contents
Advertisement
mended that the programming for the buttons is
deleted when the car is sold; see the section
®
"Programming HomeLink
".
Related information
•
®
* (p. 163)
Programming HomeLink
32
Applies to certain markets.
®
33
*" for the location of buttons and indicator lamp.
See section "HomeLink
Programming HomeLink
Instructions for programming HomeLink
®
Programming HomeLink
NOTE
In certain vehicles the ignition must be
switched on or in "accessory position" before
®
HomeLink
can be programmed or used.
Preferably fit new batteries in the remote con-
trol that will be replaced by HomeLink
faster programming and improved transmis-
sion of the radio signal. The HomeLink
tons should be reset before programming,
see the heading "Resetting the HomeLink
buttons". When the reset is complete,
®
HomeLink
is set in "learn mode" and ready
for programming.
1. Press the
33
button on HomeLink
to program. The indicator lamp
®
HomeLink
should flash yellow once per
second. It is not necessary to hold the button
depressed.
®
*
32
2. Aim the remote control towards the
HomeLink
®
.
hold it 2-8 cm from the button. Do not
obstruct the indicator lamp on HomeLink
Note: Some remote controls can program
HomeLink
15-20 cm. Bear this in mind if you encounter
problems during programming.
3. Press and hold the button on the original
remote control to be programmed on
®
for
HomeLink
lamp. Do not release the button until the
®
but-
indicator lamp has switched from flashing
yellow once per second to either flashing
®
green 10 times per second or illuminating in
a constant green glow. The button on the
remote control can be released once the
indicator lamp flashes or illuminates in green.
Note: For some receivers, programming step
3 may need to be replaced with the instruc-
®
you want
tions in step 4.
33
on
4. Press and release the button on the original
remote control every other second until the
indicator lamp has changed from flashing
yellow once per second to either flashing
green 10 times per second or illuminating in
a constant green glow.
INSTRUMENTS AND CONTROLS
®
button to be programmed and
®
.
®
better at a distance of
®
and keep an eye on the indicator
* Option/accessory.
}}
163
Advertisement
Table of Contents
