Table of Contents
Advertisement
MAINTENANCE AND SERVICE
||
NOTE
If the right conditions for measuring the oil
level (time after engine shutdown, the car's
inclination, outside temperature, etc.) are not
met, then the message
No value available
will be shown in the centre display. This does
not mean that there is something wrong in
the car's systems.
Related information
•
Engine oil (p. 516)
•
Engine oil — specifications (p. 567)
•
Adverse driving conditions for engine oil
(p. 569)
•
Ignition positions (p. 385)
•
Car status (p. 506)
518
Topping up coolant
The coolant cools the internal combustion
engine to the correct operating temperature. The
heat that is transferred from the engine to the
coolant can be used to heat the passenger com-
partment.
When topping up the coolant, follow the instruc-
tions on the packaging. Never top up with water
only. The risk of freezing increases with both too
little and too much coolant concentrate.
WARNING
Coolant can be very hot. If the coolant
requires topping up when the engine is at
operating temperature, unscrew the expan-
sion tank cap slowly to gently release the
overpressure.
Coolant expansion tank, left-hand drive car.
Screw off the cap in the plastic cover.
Screw off the cap on the expansion tank and
top up with coolant. The coolant level must
not exceed the yellow MAX mark inside the
expansion tank.
Reinstall the parts in reverse order.
Advertisement
Table of Contents
