Active Bending Lights; Rear Fog Light - Volvo S90 TWIN ENGINE 2019 Owner's Manual

Active Bending Lights*

Active Bending Lights (ABL) are designed to
help provide maximum illumination in curves and
intersections. Depending on equipment level,
5
vehicles with LED headlights* may be equipped
with Active Bending Lights.
Headlight pattern with function deactivated (left) and
activated (right).
Active Bending Lights follow the movement of
the steering wheel to help provide maximum illu-
mination in curves and intersections, helping to
improve visibility for the driver.
The function is automatically activated when the
engine is started. If a fault is detected in the sys-
tem, the symbol will illuminate in the
instrument panel and a message will be dis-
played.
5 LED (Light Emitting Diode)
The function is only active in weak daylight or
dark conditions and only when the vehicle is mov-
ing and the low beams are on.
Deactivating/activating the function
The function is activated as the default factory
setting and can be activated and deactivated in
the center display's Function view:
Active Bending
Tap the
Lights
button.
Related information
Adjusting light functions via the center dis-
•
play (p. 149)

Rear fog light

The rear fog light is considerably brighter than
ordinary taillights and should only be used to
help other road users see the vehicle when visi-
bility is reduced by conditions such as fog,
snow, smoke or dust.
Rear fog light button.
The rear fog light consists of a light on the rear
of the vehicle on the driver's side.
The rear fog light can only be switched on when
the ignition is in II mode and the lighting ring is in
position or .
Press the button for On/Off. The
the instrument panel illuminates when the rear
fog light is on.
LIGHTING
symbol in
}}
155
* Option/accessory.