Device Manager - Samsung GT-i8510 User Manual

Remove an application
1. In Standby mode, press [MENU]
→
Installations App. mgr.
2. Scroll to an application and press <Options>
→
Remove.
3. Press <Yes> to confirm.

Device manager

This feature is network-dependent and may not
be available from your service provider. If
available, Device manager allows your service
provider to assist you with device configurations.
Before you can start a configuration session, you
must define a server profile.
Define a server profile
1. In Standby mode, press [MENU]
Device mgr.
→
2. Press <Options>
→
3. Press <Options>
→
→ →
Tools
Servers.
New server.
4. Set the following server options according to
the instructions provided by your service
provider:
• Server name: set a name for this profile
• Server ID: set the ID of the remote server
• Server password: set the password that
must be used by the device manager to
sync your device
• Access point: set an access point
• Host address: set the web address of the
host server
• Port: set a port to use for the device
manager
• User name: set a user name for this profile
• Password: set a user password for this
profile
• Allow configuration: set to allow the
server to configure your device
• Auto-accept all requests: set to
automatically accept new configuration
requests
• Network authentication: set to require
network authentication
5. When you are finished setting the options,
press <Back>.
59