Navigate with GPS data
1. In Standby mode, press [MENU]
→
GPS data
Navigation.
→
2. Press <Options>
Coordinates.
3. Enter the latitude and longitude of your
destination and press [OK].
Your device will display the direction of your
destination, your current speed, and the
duration of your trip.
4. To stop the GPS navigation, press
<Options> → Stop navigation.
View your current position
In Standby mode, press [MENU]
→
GPS data
Position.
Monitor trip details
1. In Standby mode, press [MENU]
→
GPS data
Trip distance.
→
2. Press <Options>
3. Your device will track trip details, including
distance, time, and speed.
56
→
→
Tools
→
Set destination
→
→
Tools
→
→
Tools
Start.
4. To stop monitoring trip details, press
→
<Options>
Stop.
Landmarks
With Landmarks, you can save your current
location or manually enter new locations.
1. In Standby mode, press [MENU]
Landmarks.
→
2. Press <Options>
Current position or Enter manually.
To add your current location automatically,
your device must have an active
connection.
3. Enter details about the landmark (if
necessary).
4. When you are finished entering landmark
information, press <Done>.
→
→
Tools
→
New landmark