Table of Contents
Advertisement
Set a default number or address
Some contact cards may include more than one
number or address.
To assign a single number or address as the
default,
1. Open a contact list (see Copy contact cards
p. 35).
2. Scroll to a contact and press [OK].
→
3. Press <Options>
4. Scroll to a default type and press [OK].
5. Scroll to a number or address and press
[OK].
6. When you are finished, press <Back>.
Assign a speed dial number to a
contact card
You can assign speed dial numbers to up to
eight contact cards ([2] through [9]); [1] is
reserved as a speed dial number for your voice
mail.
36
Defaults.
To assign a speed dial number,
1. In Standby mode, press [MENU]
Contacts.
2. Scroll to a contact and press [OK].
3. Scroll to a phone number and press
→
<Options>
Assign speed dial.
4. Scroll to a speed dial number and press [OK].
5. Press <Yes> (if necessary).
Assign a ringtone to a contact card or
group
You can assign a ringtone to any contact card or
group.
1. In Standby mode, press [MENU]
Contacts.
2. Scroll to a contact or group and press [OK].
→
3. Press <Options>
→
→
Ringing tone.
Advertisement
Table of Contents
