Yamaha RX-V3200 Service Manual page 22

RX-V3200/DSP-AX3200
4. CS49329
8 channels are made usable by CS49329. The signal enters YSS938 through the Sub DSP passage and then undergoes
through-output.
CS49329 is selected for the Main L/R output. Using the sub-menu, it is possible to select full bit output at 0dB output level.
* As a 3dB margin of CS is always effective for RC when decoding dts ES, even when the output in full bit is specified,
the RC output remains up to 0dBFS when 0dBFS is inputted to LS/RS.
CS49329 0dB
CS49329 FULL BIT
DSP THROUGH ~
CS (Analog)
(Use of CS only is not available
due to restriction of the passage.)
Analog
Digital
DSP THROUGH ~
CS (PCM)
Analog
Digital
21
• The signal is output including the head margin.
Head margin:
Main L/R: -18dBFS, Center: -6dBFS, Rear Center: -3dBFS, FL/FR: -6dBFS,
RL/RR: -18dBFS, SWFR: Add L/R signal at -20dBFS.
Reference data (PRE OUT)
INPUT: DVD ANALOG
SWFR: 50Hz, Others: 1kHz
Condition
Both ch, -20 dBV, volume -10 dB -14.0 dBV -14.0 dBV -14.0 dBV -2.5 dBV -14.0 dBV
• The signal is output in digital full bit without including the head margin.
Reference data (PRE OUT)
INPUT: DVD ANALOG
SWFR: 50Hz, Others: 1kHz
Condition
Both ch, -20 dBV, volume -10 dB -14.0 dBV -8.0 dBV -11.5 dBV -2.5 dBV
A/D
DIR
YSS938
A/D
DIR
YSS938
MAIN L/R CENTER REAR C
MAIN L/R CENTER REAR C
CS49329
Through
Main DSP Sub DSP
Through Through
CS49329
Through
Sub DSP
Main DSP
Through
SWFR RL/RR
SWFR RL/RR
-2.0 dBV
L/R
L/R
C
L/-
RC/SW
R/L+R
FL/FR
L/R
L/R
RL/RR
L/R
L/R
C
L/-
RC/SW
R/L+R
FL/FR
L/R
L/R RL/RR